Vape Tanks

Upgrade your setup with a new vape tank from Aspire, GeekVape and other leading brands. We stock mouth-to-lung (MTL) tanks for a tighter draw and sub-ohm tanks for bigger vapour, with replacement coils for each.

16 products

MTL or sub-ohm tank?

The tank you choose decides how your vape feels.

  • MTL tanks give a tighter, cigarette-style draw. They use coils of 0.8 ohm and above and suit nic salts, freebase and 50/50 e-liquids.
  • Sub-ohm tanks give an open, direct-to-lung draw with dense vapour. They use coils below 0.5 ohm and are made for high-VG shortfills at low nicotine strengths.

Each listing shows the tank's diameter, capacity, airflow type and the coils it takes.

Will it fit my device?

Most tanks use a standard 510 thread, so they fit most box mods and vape kits with a 510 connection. Check the tank's diameter against your device so it sits flush; a 22mm to 25mm tank suits most mods.

Capacity and UK rules

UK rules limit tanks to 2ml when sold for nicotine e-liquid. Some tanks include an optional bubble glass for larger capacity, which is intended for nicotine-free e-liquid.

Looking after your tank

  • Filling – fill with the coil already installed, leave a small air gap at the top, and let a new coil soak before vaping.
  • Changing flavour – empty the tank, rinse it in warm water, dry it fully and fit a new coil if the old flavour lingers.
  • Leaking – usually caused by a loose or worn coil, damaged seals, or e-liquid that is too thin for the coil. Tighten the coil, check the O-rings and use the recommended VG ratio.

Brands

We stock tanks from Aspire, GeekVape, SMOK, Vaporesso and Innokin, with replacement coils for every tank in our Vape Coils collection.

Vape Tanks FAQs

What is the difference between an MTL tank and a sub-ohm tank?

An MTL tank gives a tight, cigarette-style draw using coils of 0.8 ohm and above. A sub-ohm tank gives an open draw and more vapour using coils below 0.5 ohm.

Why is my vape tank leaking?

Common causes are a loose or worn-out coil, damaged O-rings, overfilling, or e-liquid that is too thin for the coil. Check each of these before replacing the tank.

How do I clean my vape tank?

Take the tank apart, rinse the parts in warm water, and leave them to dry completely before reassembling. Don't rinse the coil.

Will this tank fit my vape?

Most tanks have a 510 connection and fit most box mods and 510 vape kits. Check the diameter so the tank sits flush with your device.

What e-liquid should I use in a sub-ohm tank?

Use high-VG e-liquid (70% VG or more) at 0–6mg, such as a shortfill with a nicotine shot added.